Anakart ram uyum sorunu çözümü için yardım

Chipset
-------------------------------------------------------------------------

Northbridge			Intel P35/G33/G31 rev. 10
Southbridge			Intel 82801GB (ICH7/R) rev. A1
Graphic Interface		PCI-Express
PCI-E Link Width		x16
PCI-E Max Link Width		x16
Memory Type			DDR2
Memory Size			1024 MBytes
Channels			Single
Memory Frequency		401.6 MHz (1:2)
CAS# latency (CL)		5.0
RAS# to CAS# delay (tRCD)	5
RAS# Precharge (tRP)		5
Cycle Time (tRAS)		18
Row Refresh Cycle Time (tRFC)	52
Command Rate (CR)		2T
Host Bridge			0x29C0

MCHBAR I/O Base address		0x0FED14000
MCHBAR I/O Size			4096
MCHBAR registers	


Processor 1			ID = 0
	Number of cores		2 (max 2)
	Number of threads	2 (max 2)
	Name			Intel Pentium E5200
	Codename		Wolfdale
	Specification		Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz
	Package (platform ID)	Socket 775 LGA (0x0)
	CPUID			6.7.A
	Extended CPUID		6.17
	Core Stepping		R0
	Technology		45 nm
	TDP Limit		65.0 Watts
	Core Speed		1204.9 MHz
	Multiplier x Bus Speed	6.0 x 200.8 MHz
	Rated Bus speed		803.2 MHz
	Stock frequency		2500 MHz
	Instructions sets	MMX, SSE, SSE2, SSE3, SSSE3, EM64T
	L1 Data cache		2 x 32 KBytes, 8-way set associative, 64-byte line size
	L1 Instruction cache	2 x 32 KBytes, 8-way set associative, 64-byte line size
	L2 cache		2048 KBytes, 8-way set associative, 64-byte line size
	FID/VID Control		yes
	FID range		6.0x - 12.5x
	Max VID			1.263 V