my.cnf ayarı :(

[root@server ~]# ./tuning-primer.sh
mysqld is alive

-- MYSQL PERFORMANCE TUNING PRIMER --
- By: Matthew Montgomery -

MySQL Version 5.0.51a-community-log x86_64

Uptime = 0 days 10 hrs 49 min 56 sec
Avg. qps = 66
Total Questions = 2611928
Threads Connected = 6

Warning: Server has not been running for at least 48hrs.
It may not be safe to use these recommendations

To find out more information on how each of these
runtime variables effects performance visit:
MySQL :: MySQL 5.0 Reference Manual :: 5.1.3 System Variables
Visit MySQL :: MySQL Enterprise Advisors
for info about MySQL's Enterprise Monitoring and Advisory Service

SLOW QUERIES
The slow query log is NOT enabled.
Current long_query_time = 10 sec.
You have 46 out of 2611957 that take longer than 10 sec. to complete
Your long_query_time may be too high, I typically set this under 5 sec.

BINARY UPDATE LOG
The binary update log is enabled
The expire_logs_days is not set.
The mysqld will retain the entire binary log until RESET MASTER or PURGE MASTER LOGS commands are run manually
Setting expire_logs_days will allow you to remove old binary logs automatically
See MySQL :: MySQL 5.0 Reference Manual :: 12.6.1.1 PURGE MASTER LOGS Syntax

WORKER THREADS
Current thread_cache_size = 8
Current threads_cached = 4
Current threads_per_sec = 0
Historic threads_per_sec = 0
Your thread_cache_size is fine

MAX CONNECTIONS
Current max_connections = 100
Current threads_connected = 8
Historic max_used_connections = 47
The number of used connections is 47% of the configured maximum.
Your max_connections variable seems to be fine.

MEMORY USAGE
Max Memory Ever Allocated : 1008 M
Configured Max Per-thread Buffers : 1 G
Configured Max Global Buffers : 426 M
Configured Max Memory Limit : 1 G
Physical Memory : 3.84 G
Max memory limit seem to be within acceptable norms

KEY BUFFER
Current MyISAM index space = 475 M
Current key_buffer_size = 384 M
Key cache miss rate is 1 : 1453
Key buffer fill ratio = 9.00 %
Your key_buffer_size seems to be too high.
Perhaps you can use these resources elsewhere

QUERY CACHE
Query cache is enabled
Current query_cache_size = 32 M
Current query_cache_used = 27 M
Current query_cache_limit = 1 M
Current Query cache Memory fill ratio = 85.46 %
Current query_cache_min_res_unit = 4 K
However, 269286 queries have been removed from the query cache due to lack of memory
Perhaps you should raise query_cache_size
MySQL won't cache query results that are larger than query_cache_limit in size

SORT OPERATIONS
Current sort_buffer_size = 2 M
Current read_rnd_buffer_size = 7 M
Sort buffer seems to be fine

JOINS
Current join_buffer_size = 132.00 K
You have had 822 queries where a join could not use an index properly
You should enable "log-queries-not-using-indexes"
Then look for non indexed joins in the slow query log.
If you are unable to optimize your queries you may want to increase your
join_buffer_size to accommodate larger joins in one pass.

Note! This script will still suggest raising the join_buffer_size when
ANY joins not using indexes are found.

OPEN FILES LIMIT
Current open_files_limit = 1134 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
You currently have open more than 75% of your open_files_limit
You should set a higher value for open_files_limit in my.cnf

TABLE CACHE
Current table_cache value = 512 tables
You have a total of 5249 tables
You have 512 open tables.
Current table_cache hit rate is 2%, while 100% of your table cache is in use
You should probably increase your table_cache

TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 32 M
Of 92921 temp tables, 33% were created on disk
Effective in-memory tmp_table_size is limited to max_heap_table_size.
Perhaps you should increase your tmp_table_size and/or max_heap_table_size
to reduce the number of disk-based temporary tables
Note! BLOB and TEXT columns are not allow in memory tables.
If you are using these columns raising these values might not impact your
ratio of on disk temp tables.

TABLE SCANS
Current read_buffer_size = 1 M
Current table scan ratio = 832 : 1
read_buffer_size seems to be fine

TABLE LOCKING
Current Lock Wait ratio = 1 : 644
You may benefit from selective use of InnoDB.
If you have long running SELECT's against MyISAM tables and perform
frequent updates consider setting 'low_priority_updates=1'
If you have a high concurrency of inserts on Dynamic row-length tables
consider setting 'concurrent_insert=2'.


bende cıkan sonuc budur bazı yerlerde sorun var sanırım

Mrb. Arkadaşlar benim sunucum p4 3.0 bende my.cnf ayarı alabilirmiyim. Teşekkürler kolay gelsin.
-- MYSQL PERFORMANCE TUNING PRIMER --
- By: Matthew Montgomery -
MySQL Version 5.0.77 i686
Uptime = 4 days 16 hrs 30 min 28 sec
Avg. qps = 31
Total Questions = 12625757
Threads Connected = 29
Server has been running for over 48hrs.
It should be safe to follow these recommendations
To find out more information on how each of these
runtime variables effects performance visit:
MySQL :: MySQL 5.0 Reference Manual :: 5.1.3 Server System Variables
Visit MySQL :: MySQL Enterprise Advisors
for info about MySQL's Enterprise Monitoring and Advisory Service
SLOW QUERIES
The slow query log is NOT enabled.
Current long_query_time = 10 sec.
You have 18 out of 12625778 that take longer than 10 sec. to complete
Your long_query_time may be too high, I typically set this under 5 sec.
BINARY UPDATE LOG
The binary update log is NOT enabled.
You will not be able to do point in time recovery
See MySQL :: MySQL 5.0 Reference Manual :: 6.3 Point-in-Time Recovery
WORKER THREADS
Current thread_cache_size = 0
Current threads_cached = 0
Current threads_per_sec = 4
Historic threads_per_sec = 0
Threads created per/sec are overrunning threads cached
You should raise thread_cache_size
MAX CONNECTIONS
Current max_connections = 1000
Current threads_connected = 28
Historic max_used_connections = 61
The number of used connections is 6% of the configured maximum.
You are using less than 10% of your configured max_connections.
Lowering max_connections could help to avoid an over-allocation of memory
See "MEMORY USAGE" section to make sure you are not over-allocating
MEMORY USAGE
Max Memory Ever Allocated : 213 M
Configured Max Per-thread Buffers : 2 G
Configured Max Global Buffers : 49 M
Configured Max Memory Limit : 2 G
Physical Memory : 3.21 G
Max memory limit seem to be within acceptable norms
KEY BUFFER
Current MyISAM index space = 117 M
Current key_buffer_size = 7 M
Key cache miss rate is 1 : 3343
Key buffer fill ratio = 78.00 %
Your key_buffer_size seems to be fine
QUERY CACHE
Query cache is enabled
Current query_cache_size = 32 M
Current query_cache_used = 24 M
Current query_cache_limit = 1 M
Current Query cache Memory fill ratio = 77.51 %
Current query_cache_min_res_unit = 4 K
MySQL won't cache query results that are larger than query_cache_limit in size
SORT OPERATIONS
Current sort_buffer_size = 2 M
Current read_rnd_buffer_size = 256 K
Sort buffer seems to be fine
JOINS
Current join_buffer_size = 132.00 K
You have had 561 queries where a join could not use an index properly
You should enable "log-queries-not-using-indexes"
Then look for non indexed joins in the slow query log.
If you are unable to optimize your queries you may want to increase your
join_buffer_size to accommodate larger joins in one pass.
Note! This script will still suggest raising the join_buffer_size when
ANY joins not using indexes are found.
OPEN FILES LIMIT
Current open_files_limit = 5000 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
Your open_files_limit value seems to be fine
Current table_cache value = 1024 tables
You have a total of 4426 tables
You have 1024 open tables.
Current table_cache hit rate is 2%, while 100% of your table cache is in use
You should probably increase your table_cache
TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 32 M
Of 345147 temp tables, 1% were created on disk
Effective in-memory tmp_table_size is limited to max_heap_table_size.
Created disk tmp tables ratio seems fine
TABLE SCANS
Current read_buffer_size = 128 K
Current table scan ratio = 347 : 1
read_buffer_size seems to be fine
TABLE LOCKING
Current Lock Wait ratio = 1 : 1331
You may benefit from selective use of InnoDB.
If you have long running SELECT's against MyISAM tables and perform
frequent updates consider setting 'low_priority_updates=1'
If you have a high concurrency of inserts on Dynamic row-length tables
consider setting 'concurrent_insert=2'.