• 23-01-2017, 23:46:09
    #10
    Merhabalar,
    KVM erişimi sağlayarak

    Öncelikle,

    grep sshd /etc/hosts.allow
    
    grep MaxStartups /etc/ssh/sshd_config

    nano -w /etc/pam.d/sshd
    session required pam_chroot.so


    dener misiniz hocam
  • 24-01-2017, 00:38:22
    #11
    WebHizmetlerin adlı üyeden alıntı: mesajı görüntüle
    Merhaba kusura bakmayın görmedim yoğunluktan dolayı.

    Sunucuzu reboot ettiğiniz an firewallar çakışmış olabilir centos kendinden bazlı 2 yazılımı mevcut koruma konusunda.Birbirleri ile çakışma yapmış olabilir ya da o an saldırı altında olduğunuz için yapmış olabilir.
    bu "sysctl.conf " dosyası ile ilgili olmuş olabilirmi?

    net.ipv4.icmp_echo_ignore_broadcasts = 1
     
    # Turn on protection for bad icmp error messages
    net.ipv4.icmp_ignore_bogus_error_responses = 1
     
    # Turn on syncookies for SYN flood attack protection
    net.ipv4.tcp_syncookies = 1
     
    # Turn on and log spoofed, source routed, and redirect packets
    net.ipv4.conf.all.log_martians = 1
    net.ipv4.conf.default.log_martians = 1
     
    # No source routed packets here
    net.ipv4.conf.all.accept_source_route = 0
    net.ipv4.conf.default.accept_source_route = 0
     
    # Turn on reverse path filtering
    net.ipv4.conf.all.rp_filter = 1
    net.ipv4.conf.default.rp_filter = 1
     
    # Make sure no one can alter the routing tables
    net.ipv4.conf.all.accept_redirects = 0
    net.ipv4.conf.default.accept_redirects = 0
    net.ipv4.conf.all.secure_redirects = 0
    net.ipv4.conf.default.secure_redirects = 0
     
    # Don't act as a router
    net.ipv4.ip_forward = 0
    net.ipv4.conf.all.send_redirects = 0
    net.ipv4.conf.default.send_redirects = 0
     
     
    # Turn on execshild
    kernel.exec-shield = 1
    kernel.randomize_va_space = 1
     
    # Tuen IPv6
    net.ipv6.conf.default.router_solicitations = 0
    net.ipv6.conf.default.accept_ra_rtr_pref = 0
    net.ipv6.conf.default.accept_ra_pinfo = 0
    net.ipv6.conf.default.accept_ra_defrtr = 0
    net.ipv6.conf.default.autoconf = 0
    net.ipv6.conf.default.dad_transmits = 0
    net.ipv6.conf.default.max_addresses = 1
     
    # Optimization for port usefor LBs
    # Increase system file descriptor limit
    fs.file-max = 999999
     
    # Allow for more PIDs (to reduce rollover problems); may break some programs 32768
    kernel.pid_max = 65536
     
    # Increase system IP port limits
    net.ipv4.ip_local_port_range = 2000 65000
     
    # Increase TCP max buffer size setable using setsockopt()
    net.ipv4.tcp_rmem = 4096 87380 8388608
    net.ipv4.tcp_wmem = 4096 87380 8388608
     
    # Increase Linux auto tuning TCP buffer limits
    # min, default, and max number of bytes to use
    # set max to at least 4MB, or higher if you use very high BDP paths
    # Tcp Windows etc
    net.core.rmem_max = 8388608
    net.core.wmem_max = 8388608
    net.core.netdev_max_backlog = 5000
    net.ipv4.tcp_window_scaling = 1