#
# The following information applies to each of the following types of relay
# check:
# RT_[relay type]_ALERT: 0 = disable, 1 = enable
# RT_[relay type]_LIMIT: the limit/hour afterwhich an email alert will be sent
# RT_[relay type]_BLOCK: 0 = no block;1 = perm block;nn=temp block for nn secs
RT_RELAY_ALERT = "1"
RT_RELAY_LIMIT = "100"
RT_RELAY_BLOCK = "0"
RT_AUTHRELAY_ALERT = "1"
RT_AUTHRELAY_LIMIT = "100"
RT_AUTHRELAY_BLOCK = "0"
RT_POPRELAY_ALERT = "1"
RT_POPRELAY_LIMIT = "100"
RT_POPRELAY_BLOCK = "0"
RT_LOCALRELAY_ALERT = "1"
RT_LOCALRELAY_LIMIT = "100"
# The following option currently has no effect
RT_LOCALRELAY_BLOCK = "0"
# Enable IP range blocking using the DShield Block List at
# http://www.dshield.org/block_list_info.php
# To enable this feature, set the following to the interval in seconds that you
# want the block list updated. The list is reasonably static during the length
# of a day, so it would be appropriate to only update once every 24 hours, so
# a value of "86400" is recommended
LF_DSHIELD = "86400"
# The DShield block list URL. If you change this to something else be sure it
# is in the same format as the block list
LF_DSHIELD_URL = "http://feeds.dshield.org/block.txt"
# Enable IP range blocking using the Spamhaus DROP List at
# http://www.spamhaus.org/drop/index.lasso
# To enable this feature, set the following to the interval in seconds that you
# want the block list updated. The list is reasonably static during the length
# of a day, so it would be appropriate to only update once every 24 hours, so
# a value of "86400" is recommended
LF_SPAMHAUS = "86400"
# The Spamhaus DROP List URL. If you change this to something else be sure it
# is in the same format as the drop list
LF_SPAMHAUS_URL = "http://www.spamhaus.org/drop/drop.lasso"
# Enable IP range blocking using the BOGON List at
# http://www.cymru.com/Bogons/
# To enable this feature, set the following to the interval in seconds that you
# want the block list updated. The list is reasonably static during the length
# of a day, so it would be appropriate to only update once every 24 hours, so
# a value of "86400" is recommended
#
# Do NOT use this option if your server uses IP's on the bogon list (e.g. this
# is often the case with servers behind a NAT firewall using ip routing)
LF_BOGON = "0"
# The BOGON List URL. If you change this to something else be sure it
# is in the same format as the drop list
LF_BOGON_URL = "http://www.cymru.com/Documents/bogon-bn-agg.txt"
# Connection Tracking. This option enables tracking of all connections from IP
# addresses to the server. If the total number of connections is greater than
# this value then the offending IP address is blocked. This can be used to help
# prevent some types of DOS attack.
#
# Care should be taken with this option. It's entirely possible that you will
# see false-positives. Some protocols can be connection hungry, e.g. FTP, IMAPD
# and HTTP so it could be quite easy to trigger, especially with a lot of
# closed connections in TIME_WAIT. However, for a server that is prone to DOS
# attacks this may be very useful. A reasonable setting for this option might
# be arround 300.
#
# To disable this feature, set this to 0
CT_LIMIT = "60"
# Connection Tracking interval. Set this to the the number of seconds between
# connection tracking scans
CT_INTERVAL = "60"
# Send an email alert if an IP address is blocked due to connection tracking
CT_EMAIL_ALERT = "1"
# If you want to make IP blocks permanent then set this to 1, otherwise blocks
# will be temporary and will be cleared periodically or whenever the firewall
# is restarted
CT_PERMANENT = "1"
# If you opt for temporary IP blocks for CT, then the following is the interval
# in seconds that the IP will remained blocked for (e.g. 1800 = 30 mins)
CT_BLOCK_TIME = "1800"
# If you don't want to count the TIME_WAIT state against the connection count
# then set the following to "1"
CT_SKIP_TIME_WAIT = "0"
# If you only want to ount specific states (e.g. SYN_RECV) then add the states
# to the following as a comma separated list. E.g. "SYN_RECV,TIME_WAIT"
#
# Leave this option empty to count all states against CT_LIMIT
CT_STATES = ""
# Process Tracking. This option enables tracking of user and nobody processes
# and examines them for suspicious executables or open network ports. Its
# purpose is to identify potential exploit processes that are running on the
# server, even if they are obfuscated to appear as system services. If a
# suspicious process is found an alert email is sent with relevant information.
# It is then the responsibility of the recipient to investigate the process
# further as the script takes no further action. Processes (PIDs) are only
# reported once unless lfd is restarted.
#
# The following is the number of seconds a process has to be active before it
# is inspected. If you set this time too low, then you will likely trigger
# false-positives with CGI or PHP scripts.
# Set the value to 0 to disable this feature
PT_LIMIT = "60"
# How frequently processes are checked in seconds
PT_INTERVAL = "60"
# If you want process tracking to highlight php or perl scripts that are run
# through apache for greater than PT_LIMIT seconds then disable the following,
# i.e. set it to 0
#
# While enabling this setting will reduce false-positives, having it set to 0
# does provide better checking for exploits running on the server
PT_SKIP_HTTP = "0"
# User Process Tracking. This option enables the tracking of the number of
# process any given cPanel account is running at one time. If the number of
# processes exceeds the value of the following setting an email alert is sent
# with details of those processes. A user is only reported once, so lfd must be
# restarted to reinstate checking of all users. If you specify a user in
# csf.pignore it will be ignored
#
# Set to 0 to disable this feature
PT_USERPROC = "10"
# This User Process Tracking option sends an alert if any cPanel user process
# exceeds the memory usage set (MB). To ignore specific processes or users use
# csf.pignore
#
# Set PT_USERKILL to have lfd kill off the process
#
# Set to 0 to disable this feature
PT_USERMEM = "100"
# This User Process Tracking option sends an alert if any cPanel user process
# exceeds the time usage set (seconds). To ignore specific processes or users
# use csf.pignore
#
# Set PT_USERKILL to have lfd kill off the process
#
# Set to 0 to disable this feature
PT_USERTIME = "1800"
# If this option is set then processes detected by PT_USERMEM or PT_USERTIME
# are killed
PT_USERKILL = "1"
# Check the PT_LOAD_AVG minute Load Average (can be set to 1 5 or 15 and
# defaults to 5 if set otherwise) on the server every PT_LOAD seconds. If the
# load average is greater than or equal to PT_LOAD_LEVEL then an email alert is
# sent. lfd then does not report subsequent high load until PT_LOAD_SKIP
# seconds has passed to prevent email floods.
#
# Set PT_LOAD to "0" to disable this feature
PT_LOAD = "30"
PT_LOAD_AVG = "5"
PT_LOAD_LEVEL = "6"
PT_LOAD_SKIP = "3600"
# If a PT_LOAD event is triggered, then if the following contains the path to
# a script, it will be run in a child process. For example, the script could
# contain commands to terminate and restart httpd, php, exim, etc incase of
# looping processes. The action script must have the execute bit an 
# interpreter (shebang) set
PT_LOAD_ACTION = ""
# Port Scan Tracking. This feature tracks port blocks logged by iptables to
# syslog. If an IP address generates a port block that is logged more than
# PS_LIMIT within PS_INTERVAL seconds, the IP address will be blocked.
#
# This feature could, for example, be useful for blocking hackers attempting
# to access the standard SSH port if you have moved it to a port other than 22
# and have removed 22 from the TCP_IN list so that connection attempts to the
# old port are being logged
#
# This feature blocks all iptables blocks from the iptables logs, including
# repeated attempts to one port or SYN flood blocks, etc
#
# Note: This feature will only track iptables blocks from the log file set in
# IPTABLES_LOG below and if you have DROP_LOGGING enabled. However, it will
# cause redundant blocking with DROP_IP_LOGGING enabled
#
# Warning: It's possible that an elaborate DDOS (i.e. from multiple IP's)
# could very quickly fill the iptables rule chains and cause a DOS in itself.
# The DENY_IP_LIMIT should help to mitigate such problems with permanent blocks
# and the DENY_TEMP_IP_LIMIT with temporary blocks
#
# Set PS_INTERVAL to "0" to disable this feature. A value of between 60 and 300
# would be sensible to enable this feature
PS_INTERVAL = "0"
PS_LIMIT = "10"
# You can specify the ports and/or port ranges that should be tracked by the
# Port Scan Tracking feature. The following setting is a comma separated list
# of those ports and uses the same format as TCP_IN. The default setting of
# 0:65535 covers all ports
PS_PORTS = "0:65535"
# You can select whether IP blocks for Port Scan Tracking should be temporary
# or permanent. Set PS_PERMANENT to "0" for temporary and "1" for permanent
# blocking. If set to "0" PS_BLOCK_TIME is the amount of time in seconds to
# temporarily block the IP address for
PS_PERMANENT = "0"
PS_BLOCK_TIME = "3600"
# Set the following to "1" to enable Port Scan Tracking email alerts, set to
# "0" to disable them
PS_EMAIL_ALERT = "1"
# Account Tracking. The following options enable the tracking of modifications
# to the accounts on a server. If any of the enabled options are triggered by
# a modifications to an account, an alert email is sent. Only the modification
# is reported. The cause of the modification will have to be investigated
# manually
#
# You can set AT_ALERT to the following:
# 0 = disable this feature
# 1 = enable this feature for all accounts
# 2 = enable this feature only for accounts with uid 0 (e.g. root)
AT_ALERT = "2"
# This options is the interval between checks in seconds
AT_INTERVAL = "60"
# Send alert if a new account is created
AT_NEW = "1"
# Send alert if an existing account is deleted
AT_OLD = "1"
# Send alert if an account password has changed
AT_PASSWD = "1"
# Send alert if an account uid has changed
AT_UID = "1"
# Send alert if an account gid has changed
AT_GID = "1"
# Send alert if an account login directory has changed
AT_DIR = "1"
# Send alert if an account login shell has changed
AT_SHELL = "1"
# OS settings
IPTABLES = "/sbin/iptables"
MODPROBE = "/sbin/modprobe"
IFCONFIG = "/sbin/ifconfig"
SENDMAIL = "/usr/sbin/sendmail"
PS = "/bin/ps"
FUSER = "/sbin/fuser"
VMSTAT = "/usr/bin/vmstat"
LS = "/bin/ls"
MD5SUM = "/usr/bin/md5sum"
TAR = "/bin/tar"
CHATTR = "/usr/bin/chattr"
# Log files
HTACCESS_LOG = "/usr/local/apache/logs/error_log"
MODSEC_LOG = "/usr/local/apache/logs/error_log"
SSHD_LOG = "/var/log/secure"
SU_LOG = "/var/log/secure"
FTPD_LOG = "/var/log/messages"
SMTPAUTH_LOG = "/var/log/exim_mainlog"
SMTPRELAY_LOG = "/var/log/exim_mainlog"
POP3D_LOG = "/var/log/maillog"
IMAPD_LOG = "/var/log/maillog"
CPANEL_LOG = "/usr/local/cpanel/logs/login_log"
SCRIPT_LOG = "/var/log/exim_mainlog"
IPTABLES_LOG = "/var/log/messages"
SUHOSIN_LOG = "/var/log/messages"